Sealing cone:

rpco Company is a manufacturer of plastic spacers and other parts related to concrete formwork, and one of rpco's products is a sealing cone. Stay tuned for more information on the applications, features and price of the sealing cone.

The use of belts and restraints in the concrete formwork system to control the lateral pressures of the concrete is inevitable.

If the formwork is not stabilized by the passage of the belt and restraint by washers and nuts and restraints on the back of the formwork, the hydrostatic pressure of the concrete during concreting will cause the formwork to disintegrate and the concrete and concrete structure to collapse.

For the passage of the belt in concrete structures such as pools and tanks and in general water structures, it is very important to consider the sealing for the walls and floor, sealing should be done after the bolt exits. It is possible to fill the holes left in the belt with sealing mortars, but this is very difficult and tedious.

Intermediate parts can be used to close the belt in the walls that must be sealed. These intermediate parts are called intermediate belts, which are designed and manufactured in different types.

One of the types of sealing belts is a spring sealing belt which consists of a sheet (sealing curtain) in the middle and springs on both sides to which the outer belt is attached and the other side of the belt is taken out of the mold. It is fixed by nuts, washers and restraints. In order not to touch the surface of the mold, because it is made of metal, a conical plastic piece should be used.

This piece with a length of 3 cm is produced as standard and creates a distance of 3 cm between the surface of the formwork so that the presence of metal on the concrete surface does not cause the transfer of corrosion into the rebar network. Plastic cone plastic part is made of compressed polyethylene.

Application, features and purchase price of conical seal:
This piece is placed on both sides of the cast or metal seal support in contact with the mold walls.

Special sealing cone feature:
The shape of the piece and its angles are such that after removing it, the created hole can be easily filled with suitable filling mortars, it prevents the exit of concrete mortar, and also rpco, as a manufacturer of sealing cones, has the most suitable conical price. Provides a seal.

The sealing cone is designed and manufactured within the framework of international standards. If you are looking for a manufacturer of plastic spacers and molding parts, please contact our experts to get the price list of tape seals between belts and other parts on the market.