Flat fix spacer (FF) Flat fix

Designers of plastic plastic spacers are always researching to discover the challenges of executors of concrete structures during foundation and formwork operations, and design and produce parts that will solve these problems to a large extent. One of these challenges is to place spacers on soft, sunken surfaces such as freshly poured concrete or roof ionolites, which rpco, a manufacturer of flat-fix spacers, has addressed. Read more to know the specifications and price of Flat Fix spacer.

Application of flat fix spacer:

Suitable for soft and submersible surfaces, freshly poured concrete and weak parts such as insulation surfaces and light roofs made of ionolite.

Application, features and price of flat fix spacer:

No holes and dents in soft and insulated surfaces, proper balance and stability, easy placement under rebar nets - reasonable price of flat fix spacer

Amount of use of flat fix spacer:

4 on a soft and sinking surface per square meter

On ionolite, 2 in width and at a distance of 50 cm from each other in length

Rebar on soft and recessed surfaces, such as Ionolite-covered roofs, has always been a concern for structural operators; Because the spacers installed for these levels, usually due to the movement of workshop personnel and the movement of materials and concreting, sink into the existing soft and sinking surface, and thus the integrated coverage under the rebar network will not be observed.

It should be noted that low-diameter thermal rebars are commonly used on ionolite coated surfaces. For this purpose, the flat fix spacer, the upper part of which is exactly the same as the mini fix spacer or clamp film, has been designed and produced with the difference of having a horizontal plate under the spacer.

This piece has enough seating and static on a soft and sinking surface and will not sink. Flat fix spacer is able to place rebar up to 16 diameters inside its tentacles and depending on the height, is able to withstand a point load of 25 to 35 kg.

How to use a flat fix spacer:

Felt fixed rebar holder has two toothed prongs that are installed in order to lock and fix the rebar inside the spacer. After placing the rebar between the spacer tentacles and sitting on the seat, the rebar is locked by the tentacles. The distance of the rebar seat to the floor of the formwork or surface will determine the concrete cover on the rebar. A flat plate is also installed horizontally under the flat fix spacer, which should be placed on the surface completely horizontally to prevent the spacer from penetrating or sinking into the sinking surfaces. 

Flat fixed plastic spacer is designed and manufactured within the framework of international standards. If you are looking for a manufacturer of plastic spacers, to get the price list of flat fix spacers and other spacers on the market, contact our experts at rpco company.