Ceramic tile screw leveler

Today, the construction industry has faced significant advances in the ease of implementing methods in various sectors, including tiling, and tile leveling is one of the most widely used tools in this process. rpco company is a manufacturer of ceramic tile spacers, a manufacturer of screw tile levelers and other tiling tools, which produces this product with the highest quality available in the market and offers it to its customers.

Screw leveler is another requirement that is widely used in tiling. Every day we see the invention of modern and creative technologies, tools and equipment such as screw leveler to facilitate work and increase efficiency and productivity while increasing Quality is being produced and distributed in all areas of construction, industry, etc., the screw leveler has made dramatic changes in these areas by changing and improving the methods of construction and execution. Modern and efficient tools and equipment for tiling are in development.

Use ceramic tile leveler

In the field of tiling, in addition to the design and color of the tiles and observing the rules of decoration design to be set with the tiles, what is very important is the level or so-called alignment of the ceramic tiles with each other and also observing the exact distance between the tile joints. It will double the beauty and quality of the tiles. One of the newest tools that has been invented and produced for leveling ceramic tiles is the screw leveler, which consists of two pieces of clips and wedges and is made of durable plastic. Screw aligner clips act like a screw and wedge The screw aligner also acts like a nut and is inserted as a screw and nut, causing the ceramic tiles to align with each other.

The use of screw levelers to level ceramic tiles, in addition to aligning and observing the distance between the joints, has other advantages in terms of increasing the execution speed, not using tools such as aligners and hammers. Traditional methods for installing ceramic tiles usually use hammer and level blows for leveling, which must be done for each tile that is placed next to each other, which is much more time consuming in terms of leveling method. With the help of a screwdriver will be.

If the ceramic tile surfaces are accurately leveled, the pterygium position between the tiles and the ceramics will disappear. Because these points are a good place for water to accumulate during washing, which, if stagnant, will lead to the formation of bacteria and algae in the place of the tiles, and will also cause the dams to become dull and cloudy.

How to use screw leveler for ceramic tiles
The product of screw leveling ceramic tiles consists of two pieces of clips and wedges. The screw leveling clip consists of two parts perpendicular to each other. The horizontal part of the floor of the clip is in the form of a flat plate that is placed under the tiles, and the vertical part of the leveling of the screw tile is also like a spiral bar (screw). The wedge-level tile wedge is also like a circular round cap with a bead-like shape at the top so that it can be fastened to the clip like a bead.

When two tiles are placed next to each other, according to the size of each side of the tile or ceramic, the required number of levelers is selected and the clip is placed at the joint of the two tiles and the wedge is closed by the screw rod protruding from the joint. Between two tiles, the two tiles are aligned with each other.

To do the tiling with the help of a screw leveler, it is recommended to start the tiling from a corner and draw 90 degree guide lines for the proper placement of the first tile as a guide, and after rubbing the ceramic tile adhesive with a comb spatula, the first tile. Install and install the adjacent tiles with the help of a screw leveler to complete the desired surface. After finishing the tiling of the surface, wait until it sets and make sure that the ceramic tiles stick to the surface, then break the clips by applying a side impact with a hammer or the toe of the shoe.

The amount of use of screw tile leveler in the desired environment for tiling is determined according to the dimensions of the tile and the size of the surface. Ceramic tiles with smaller dimensions need less number of screw levelers in each aspect, but larger dimensions need more number of levelers in each aspect.

Number of levelers required for small tiles such as 30 * 30 tiles

The number of screw levelers required for small tiles, such as 30 x 30 or smaller tiles, is one on each side of the tile. Note that in cases where there is a number of screw levelers on each side of the tile, the screw leveler should be in the middle of each side. In small tiles, a number of screw tile levelers can be placed at the intersection of tiles or ceramics to increase the accuracy.

Number of screw tile levelers required for 40 * 40 and 50 * 50 cm dimensions

In ceramic tiles with dimensions up to 50 x 50 cm, the number of screw levelers used in each side of the tile is 2. It is recommended that the leveler be placed in these dimensions of ceramic tiles with a distance of 10 cm from the edges of ceramic tiles. In these dimensions, a screw leveler can be placed in the center of the tile face and a screw leveler can be used at the intersection of the tiles.
Number of screw tile levelers required for dimensions of 60 * 60 to 80 * 80 cm

The number of screw levelers required for these dimensions is 3 in each face. In this way, two aligners are placed at a distance of 10 cm from each edge and the third aligner is placed in the center of the desired face.

Number of tile levels required for dimensions larger than 80 x 80 cm

In larger dimensions, one screw tile aligner should be used for every 20 to 25 cm of each side length.

If you do not use level tiles in tile joints, in addition to creating heterogeneous joints, you will have an uneven surface or the so-called pterygium. If the work surface has a pterygium, while reducing the quality and beauty of the work, it provides a suitable space for water to accumulate during washing, which after a while becomes a mass and becomes cloudy, which will not have a good appearance.

Manufacturer of ceramic tile levelers

rpco company is a manufacturer of ceramic tile levelers with the best quality available in the market. The final product of this brand, in addition to having quality benefits, also has the advantage of being suitable for the price of ceramic tile levelers, and you can contact rpco company experts. Get a free consultation to choose the desired product or inquire about the price of your desired tile aligner.
Now you can get advice or order this product through the online support of the site or by calling the numbers of the contact us section.